Download Print this page
AEM 30-3508 Instruction Manual

AEM 30-3508 Instruction Manual

2000–2005 honda s2000 infinity-6 and infinity-8h plug & play adapter harness

Advertisement

Quick Links

Instruction
Manual
Infinity-6 and Infinity-8h*
Plug & Play Adapter Harness
THIS PRODUCT HAS LEGAL RESTRICTIONS.
THIS PRODUCT MAY BE USED SOLELY ON VEHICLES USED IN SANCTIONED COMPETITION WHICH MAY NEVER BE USED UPON A
PUBLIC ROAD OR HIGHWAY, UNLESS PERMITTED BY SPECIFIC REGULATORY EXEMPTION. (VISIT THE "EMISSIONS" PAGE AT
HTTP://WWW.SEMASAN.COM/EMISSIONS
IT IS THE RESPONSIBILITY OF THE INSTALLER AND/OR USER OF THIS PRODUCT TO ENSURE THAT IT IS USED IN COMPLIANCE WITH
ALL APPLICABLE LAWS AND REGULATIONS. IF THIS PRODUCT WAS PURCHASED IN ERROR, DO NOT INSTALL AND/OR USE IT. THE
PURCHASER MUST ARRANGE TO RETURN THE PRODUCT FOR A FULL REFUND.
THIS POLICY ONLY APPLIES TO INSTALLERS AND/OR USERS WHO ARE LOCATED IN THE UNITED STATES; HOWEVER CUSTOMERS
WHO RESIDE IN OTHER COUNTRIES SHOULD ACT IN ACCORDANCE WITH THEIR LOCAL LAWS AND REGULATIONS.
WARNING: This installation is not for the tuning novice! Use this system with EXTREME caution! The AEM
Infinity Programmable EMS allows for total flexibility in engine tuning. Misuse or improper tuning of this
product can destroy your engine! If you are not well versed in engine dynamics and the tuning of engine
management systems DO NOT attempt the installation. Refer the installation to an AEM-trained tuning
shop or call 800-423-0046 for technical assistance.
NOTE: All supplied AEM calibrations, Wizards and other tuning information are offered as potential
starting points only. IT IS THE RESPONSIBILITY OF THE ENGINE TUNER TO ULTIMATELY CONFIRM IF THE
CALIBRATION IS SAFE FOR ITS INTENDED USE. AEM holds no responsibility for any engine damage that
results from the misuse or mistuning of this product!
*See next page for important information regarding the use of this harness with Infinity-8h
AEM Performance Electronics, 2205 126th Street Unit A, Hawthorne, CA 90250
P/N 30-3508
2000–2005 Honda S2000
STOP!
READ THIS BEFORE INSTALLING/USING!
FOR STATE BY STATE DETAILS.)
AEM Performance Electronics
Phone: (310) 484-2322 Fax: (310) 484-0152
http://www.aemelectronics.com
Instruction Part Number: 10-3508
Document Build 2017-09-27

Advertisement

loading
Need help?

Need help?

Do you have a question about the 30-3508 and is the answer not in the manual?

Questions and answers

Summary of Contents for AEM 30-3508

  • Page 1 WHO RESIDE IN OTHER COUNTRIES SHOULD ACT IN ACCORDANCE WITH THEIR LOCAL LAWS AND REGULATIONS. WARNING: This installation is not for the tuning novice! Use this system with EXTREME caution! The AEM Infinity Programmable EMS allows for total flexibility in engine tuning. Misuse or improper tuning of this product can destroy your engine! If you are not well versed in engine dynamics and the tuning of engine management systems DO NOT attempt the installation.
  • Page 2: Getting Started

    · v96.X Inf-508 Universal OPTIONS 30-2001 UEGO Wideband O2 Sensor Bosch LSU4.2 Wideband O2 Sensor that connects to AEM 30-3600 UEGO Wideband O2 Sensor Extension Harness 30-3600 UEGO Wideband O2 Sensor Extension Harness Extension harness to connect AEM UEGO Wideband O2 sensor to 6-pin Deutsch 30-3602 IP67 Logging Cable USB A-to-A extension cable: 39”...
  • Page 3 ** Must de-pin for use with Infinity- 8h; Coil8 not used** INFINITY CONNECTORS The AEM Infinity EMS uses the MX123 Sealed Connection System from Molex. Refer to the 10-7100 for EMS 30-7100 Infinity Quick Start Guide for details on connector assembly and handling.
  • Page 4 2005 Honda S2000 kit is an adapter harness. This is used to make the – connection between the AEM Infinity EMS and the Honda wiring harness plug and play. This is depicted below with the 80-pin connector and the Honda header. There are also a few other integrated connectors within this harness described below.
  • Page 5 Rather than OBD2 diagnostics, the CEL light is now dedicated to the AEM “MILOutput” feature. The AEM MILOutput activates if any 1 of the following inputs are in an error state: air temp, baro pressure, coolant temp, exhaust back pressure, fuel pressure, UEGO #1, UEGO #2, MAF analog, MAF digital, MAP, oil pressure, or throttle position.
  • Page 6 (Velcro) will still be used to hold the Infinity EMS in place while 1 of the OEM ECU bolts will be reused to secure it to the spare M6 mounting boss, circled in red. © 2017 AEM Performance Electronics...
  • Page 7 AEM adapter. Connect the included mini USB communication cable to the EMS. If there are to be any AEMnet devices that will be daisy-chained to the Infinity EMS, secure it to the AEM adapter’s 4P Deutsch connector. © 2017 AEM Performance Electronics...
  • Page 8 Deutsch connector through. Reattach grommet to firewall. Mate extension harness to the Deutsch connector found in the AEM adapter. If any of the auxiliary connections are to be installed now is the time to assemble these.
  • Page 9 0–5V f alling edge f ire. Do NOT connect Ignition Coil Pulse Coil 3 25 mA max source current directly to coil primary . Must use an ignitor or No. 3 CDI that accepts a f alling edge f ire signal. © 2017 AEM Performance Electronics...
  • Page 10 See Setup Wizard page f or A/C activ ation switches. 10K pullup to 12V. Will work Found on the Aux Connector. Input can be Digital 6 - with ground or f loating assigned to dif f erent pins. See Setup Wizard switches. © 2017 AEM Performance Electronics...
  • Page 11 See Knock in Setup Wizard f or options. processor Logic Ground 1 Power Ground Connect directly to battery ground. Connects to relay f ound in AEM adapter. Will 12V_Relay _ 0.7A max ground sink f or activ ate at key ON and at key OFF according Control external relay control to the conf iguration settings.
  • Page 12 12 bit A/D, 100K pullup to ref erenced to +12V as this can permanently APP1 damage the ECU. Ana16 12 bit A/D, 100K pullup to 0–5V analog signal f ound on the Auxiliary - Throttle2 Connector © 2017 AEM Performance Electronics...
  • Page 13 Sensor Ground Gray +5V_OUT Sensor +5V Yellow Analog_In_13 Oil Pressure Digital_In_6 Digital 6 Pink Orange +12V +12V Digital_In_3 Flex Fuel Sensor (Hz) Yellow Analog_In_16 Throttle2 Yellow Analog_In_10 Baro Yellow Analog_In_11 Trac / Run / Launch Boost © 2017 AEM Performance Electronics...
  • Page 14 UEGO1 VM UEGO1 IP AEMNet Deutsch Pin Infinity Pin Default Pin Function CAN A+ CAN A- +12V Ground FLASH ENABLE Delphi Pin Infinity Pin Default Pin Function Harness Flash Enable Permanent Pow er Honda Pin Numbering © 2017 AEM Performance Electronics...
  • Page 15 2000–2005 Honda S2000 Infinity Pin Numbering View ed from Wire Side © 2017 AEM Performance Electronics...
  • Page 16: 12 Month Limited Warranty

    12-month w arranty period w ill be repaired or replaced at AEM’s option, w hen determined by AEM that the product failed due to defects in material or w orkmanship. This w arranty is limited to the repair or replacement of the AEM part. In no event shall this w arranty exceed the original purchase price of the AEM part nor shall AEM be responsible for special, incidental or consequential damages or cost incurred due to the failure of this product.