Page 4
Installa on of the light adapter 800077 2013 Dodge 2500/3500 Laramie , 2014 Dodge 2500/3500 Remove the cover from the light housing. Unplug two bulb connectors. 1 ...
Page 5
Install connectors from 800077 adapter as shown on the picture . 2 ...
Page 6
Plug original vehicle connectors in Rubber Plugs of 800077. Note: All 4 Rubber Plugs must be inverted. 3 ...
Page 7
Connect relay kits to Turn Signal Wire Pin #12, Park Wire Pin #2 and DRL wire Pin #4. Make that connec‐ on 2‐3” away from the end of plug. 4 ...
Page 8
Cut a groove (3/8” x 3/8”) in the cover of the light housing. A er installa on of adapter 800077 run all wires through the cutout. Silicone the groove a er installa on of the cover to the light housing. 5 ...
Page 9
800077 Light Kit Part # Description Quantity 420941 Headlamp adapter 420942 Headlamp adapter 800079 Relay Harness for Park Lights 800041 Relay 761232 Butt Connector 800039 Relay Harness for daytime running lamp HH-00455-007 #8 Screw Note: Relay Kit 800038 is not required with 1 piece harness ...