Table of Contents
Advertisement
8.6. CYANURIC ACID
REQUIRED REAGENTS
Code
HI93722-0
REAGENT SETS
HI93722-01
HI93722-03
For other accessories see ACCESSORIES section.
MEASUREMENT PROCEDURE
• Select the
SELECTION section.
Note: If tutorial mode is disabled, follow the measurement procedure below. If the
tutorial mode is enabled, press Measure and follow the messages on the screen.
• Fill the first cuvette with 10 mL of unreacted sample (up
to the mark). Replace the plastic stopper and the cap.
• Insert the cuvette into the holder and ensure that the
notch on the cap is positioned securely in the groove.
• Press Zero. The display will show "-0.0-" when the meter is zeroed and ready for
measurement.
• Fill a beaker with 25 mL sample (up to the mark).
36
Description
Cyanuric Acid Reagent
Cyanuric Acid Reagent - 100 tests
Cyanuric Acid Reagent - 300 tests
Cyanuric Acid
method using the procedure described in the METHOD
Quantity
1 packet
10 mL
# 1
# 1
Advertisement
Table of Contents
