Connect To Network; Wireless Setting; Wired Setting - Philips 50PFL5601 User Manual

50PFL5601 serial numbers beginning with DS1 and DS2

Connect to network

Setup network connection settings in order to use Net TV or network
upgrade functions.
•
The meanings of abbreviations are defined as below.
: Wireless LAN access point
AP
: Wireless network name
SSID
•
The key entry screen will appear when you select SSID, WEP /
others or proxy address.
Network settings
If your router has an easy connect feature, select Easy Connect and press OK.
If your router does not have an easy connect feature, select Manual and press OK.
Text
_ ? ! -
g h i
p q r s
Pin code o ode Easy Connect Easy Connect
abc
•
Enter the key of the selected wireless network using
press OK.
: Clear the entered number or word.
Clear
: Clear all the entered numbers or words.
All clear
: Switch to the small letter mode.
abc
: Switch to the capital letter mode.
ABC
: Switch to the numeral and symbol mode.
123+/;
: Shows the cancellation display.
Cancel
: Set the entered number or word.
OK
1
Press and use
2
Use to select Connect to network, then press OK.
Network settings
This TV can be connected to
your home network.
Select your connection type.
Cancel
3
Adjust the following items.
b c d e f
a
OK
j k l m n o
All clear
t u v w x y z
Manual Manual
Cancel
. , @ '
ABC 123+/; Clear
to select Setup, then press OK.
Wireless
Wired

Wireless setting

Select to use a wireless LAN to connect to the internet by a wireless
connection.
1
Use to select Wireless, then press OK.
2
Use to select the desired setting, then press OK, and follow the
on-screen instructions.
Easy Connect
Scan
Manual entry
* Easy Connect cannot be used when the security protocol is set to WEP.
Change the Access Point's security mode from WEP to others
12 3
(recommended).
, then

Wired setting

Select to use an Ethernet cable to connect to the internet by a wired
connection. Please purchase shielded Ethernet cables at your local store
and use it when you connect to network equipment.
1
Use to select Wired, then press OK.
•
Connection test will start automatically.
12 3
Select this setting if your router has an easy
connect button. Start scanning for wireless
networks on the TV after pressing the easy
connect button on your router. If connection test
fails, refer to the router's manual for more details.
Search for wireless networks automatically and
select the wireless network name (SSID) from the
list.
Set up the connection to the wireless LAN Access
Point (AP) (e.g. wireless router) manually by
entering the wireless network name (SSID).
p. 41
Continued on next page.
.
38
English