Philips 50PFL5601 User Manual page 18

50PFL5601 serial numbers beginning with DS1 and DS2
8
Use to select your preferred picture setting, then press OK.
Please select your preferred picture mode.
Skip
9
Use to select your preferred sound setting, then press OK.
Please select your preferred sound mode.
1
Skip
10
After Picture and sound setup is completed, a message will appear
if there is the latest software on the network server.
Note(s)
•
If you are not receiving a signal from your cable service, contact the cable provider.
•
If you press during Autoprogram, this setup of TV channels will be cancelled.
•
The initial Autoprogram function can be executed for either Antenna or Cable only once. When
you change the connection (Antenna / Cable), select Search for channels again.
A A fter an initial setup is completed...
•
•
Standard
Vivid
Sports
•
1 2
•
•
•
Standard
Vivid
Sports
2
p. 35
If you want to scan the channels automatically again.
Search for channels p. 35
If you want to change to another language.
Language p. 33
If you want to change the country setting.
Country p. 48
If you want to change the location setting.
Location p. 33
If you want to change the network setting.
Connect to network p. 38
If you want to restore the picture and sound setting.
Picture and sound setup p. 28
.
18
English