Unpacking; Installing The Stands - Philips 50PFL5601 User Manual

50PFL5601 serial numbers beginning with DS3 or higher numbers

Unpacking

It is recommended that two or more people remove the TV set from the
box. Be careful not to injure your fingers and keep children away during
assembly.
1
Open the top flaps of the box.
2
Remove all accessories.
3
Prepare a table and cover the top of it with a table cloth, blanket or
such to avoid damage to the TV set. Support both sides of the TV set
and, move it onto the table.
4
Carefully lay the TV set, with the screen side down, on the table.

Installing the stands

1
Remove the tape on the bottom of the TV set and the plastic bag.
2
Fasten the matching stand to the TV with 2 screws (included). While
fastening the screws, hold the stand to prevent it from falling. Also,
make sure to attach the stand parallel to the bottom of the TV set, as
shown in the enlarged illustration.
2 screws
required
3
Fasten the other stand to the TV with 2 screws (included). While
fastening the screws, hold the stand to prevent it from falling.
2 screws
required
4
Both stands should now be securely fastened.
Note(s)
•
A wide open space is recommended for assembly.
•
A Phillips-head screwdriver is required to fasten the stands to the TV set.
•
When attaching the stand, ensure that all screws are tightly fastened. If the stand is not properly
attached, it could cause the unit to fall, resulting in injuries as well as damage to the unit.
•
To remove the stand from this unit, unscrew the Phillips-head screws by reversing the
procedure. Be careful not to drop the stand when you remove it.
.
9
English
Continued on next page.