Philips 50PFL5601 User Manual page 40

50PFL5601 serial numbers beginning with DS1 and DS2
Manually enter your SSID
Set up the connection to the AP (e.g. wireless router) manually by entering
the SSID.
3
Use to select Manually enter your SSID, then press OK.
•
AP (e.g. wireless router) SSID entry screen will appear.
Enter the SSID using
4
Use to select the authentication setting of the selected wireless
network.
•
For a wireless network with authentication setting, select the
authentication setting, according to the security type of the wireless
network.
Auto
Manually enter your SSID
Set the authentication setting to None.
None
Set the authentication setting to WEP
WEP
Set the authentication setting to Others.
Others
•
For a wireless network without authentication setting, select None.
•
If you select WEP or Others, WEP
*
Enter the WEP / others key of the selected wireless network using
*
, then press OK.
•
Confirmation message will appear. Select Yes to complete the settings.
* WEP is not recommended to be used due to its major security flaws.
Change the security protocol on the wireless router to others
(recommended) mode.
, then press OK.
XXXXXXXXXXXXXX None
WEP
Others
/ others Key entry screen will appear.
*
I I P configuration
In following cases, select IP configuration to set each setting as
necessary.
–When connection test failed with the setting of Connection test.
–When instructed by your Internet service provider to make specific
settings in accordance with your network environment.
2
Use
3
Use
Network selection
Wireless network setting
IP configuration
Proxy configuration
IP setting
mode
IP address
.
*
Subnet mask
Default gateway
DNS setting
mode
Primary DNS
Secondary DNS
MAC address
Items can be selected only when IP setting mode is set to Manual.
*1
Items can be selected only when DNS setting mode is set to
*2
Manual.
Use
*3
to input numbers, then press OK or input the triple digits by
using the NUMBER buttons, the cursor moves to the next entry field.
When you use
triple digits by using the NUMBER buttons at the rightmost entry
field, numbers will be stored and go back to the previous menu.
Note(s)
•
The range of input numbers is between 0 and 255.
•
If you enter a number larger than 255, the number will automatically be 255.
•
The manually entered number will be saved even if you change the setting to Auto.
•
If you want to enter 1 or 2 digit number in one cell, press OK to move on to the next cell.
•
If the entered IP address or the default gateway or primary DNS number is same as the default
setting, IP address setting will be set to Auto. (The manually entered number will be saved).
•
When IP address setting is set to Manual, the setting of DNS setting will automatically be Manual
and when IP address setting is set to Auto, you can set either Auto or Manual for DNS setting.
to select IP configuration, then press OK.
to select a setting, then press OK.
IP setting mode
IP address
Subnet mask
Default gateway
DNS setting mode
Primary DNS
Secondary DNS
MAC address
Sets the IP setting automatically.
Auto
Sets the IP setting manually.
Manual
A set of numbers which are assigned to
devices participating in a computer
*1, 3
network.
A mask which is used to determine what
*1, 3
subnet an IP address belongs to.
IP address of the network device (such as
*1, 3
router) which provides internet access.
Sets the DNS setting automatically.
Auto
Sets the DNS setting manually.
Manual
A server which handles the name and IP
*2, 3
address over the internet.
A server which handles the name and IP
*2, 3
address over the internet.
An address which recognizes the devices
connecting to the network. It is also called
hardware address.
or the NUMBER buttons to input numbers. When you use
to input numbers, then press OK or input the
.
40
English
Auto
Manual
Continued on next page.