Network Updates; Software Settings; Software - Philips 50PFL5601 User Manual

50PFL5601 serial numbers beginning with DS3 or higher numbers

Network updates

You can update the software by connecting the unit to the internet.
1
Press and use
2
Use to select Update software, then press OK.
3
Use to select Network, then press OK.
4
Use to select Yes, then press OK.
•
This unit will then start checking for the latest FirmWare (software)
version.
5
Confirmation message will appear.
Use to select Yes, then press OK.
•
The unit will start downloading the latest FirmWare (software)
version.
•
The unit will start updating the FirmWare (software) version.
•
It may take a while to complete the updating.
6
When the software update is complete, press
goes to standby mode.
7
Unplug the AC power cord for a few seconds from AC outlet and plug
it again.
8
Press again to turn the unit on.
•
The TV starts up with the new software.
For further assistance, please contact call center.
Note(s)
•
In order to update software via the Internet, you must connect the unit to the Internet and set
up necessary settings.
Connect to network p. 38
Network settings p. 39
•
Please do not unplug the AC power cord or Ethernet cable while executing the Network
updates.
•
All settings will remain the same even if you update the software version.
•
The version of net service will also be updated if newer version of net service is available when
updating the firmware.
•
When you start up the TV or a net service after executing the software update, a message may
appear on the screen prompting for software update again. In this case, please select Update
to start USB update or network update. For further assistance, please contact call center.
to select Setup, then press OK.
to make sure the unit

Software settings

Software

1
Press and use to select Setup, then press OK.
2
Use to select Software settings, then press OK.
3
Use to select Software, then press OK.
Checking your current software version number
1
Use to select Software information, then press OK.
•
The version and a description of the current software is displayed.
Update notification
You can download the latest software through the air and update this unit
automatically while the unit is in standby mode.
1
Use to select Update notification, then press OK.
2
Use to select the desired option, then press OK.
Disable auto-update for latest software.
Off
A message will appear if there is the latest software on
On
the network server.
License
Displays the licenses of open source software used in this unit.
1
Use to select License, then press OK.
•
Licenses of open source software used in this unit are displayed.
Digital rights management
This product contains technology subject to certain intellectual property
rights of Microsoft. Use or distribution of this technology outside of this
product is prohibited without the appropriate license(s) from Microsoft.
1
Use to select Digital rights management, then press OK.
•
Digital rights management is displayed.
.
44
English
Continued on next page.