Accessibility - Philips 50PFL5601 User Manual

50PFL5601 serial numbers beginning with DS3 or higher numbers
E E asyLink (HDMI CEC)
This function allows you to operate the linked functions between our
brand devices with a EasyLink feature and this unit connecting through
an HDMI cable. You must connect this unit to our brand EasyLink devices
and be sure its EasyLink (HDMI CEC) setting is also set to on.
1
Use to select Preferences, then press OK.
2
Use to select EasyLink, then press OK.
3
Use to select the item you want to adjust, then press OK.
Location
EasyLink
HDMI mode
TV placement
Retail Demo
Set the Master EasyLink to On or Off. The following additional settings
will be grayed out when you set them to Off.
Off
Master
EasyLink
On
This unit will turn on when the power on signal is sent from your connected
EasyLink device.
Off
Auto TV On
On
You can operate some functions such as disc playback or call up the
menu of the connected devices, by using this unit's remote control.
Off
RC key
forwarding
On
Note(s)
•
Pause may not work properly on some devices even if they are EasyLink (HDMI CEC)
compliant.
HDMI-ARC allows you to use Philips EasyLink to output TV audio directly
to a connected audio device, without the need for an additional digital
audio cable.
Off
HDMI-ARC
(HDMI 1 only)
On
Master EasyLink O
Auto TV On On
RC key forwarding
HDMI-ARC
Disables all EasyLink.
Selects if you have connected an
external device that is compatible with
the EasyLink function.
This unit stays in Standby mode even
if you turn on your connected EasyLink
device.
This unit turns on automatically when
you turn on your connected EasyLink
device.
Disable RC key forwarding.
/ STOP
PLAY, PAUSE
/ REV / VOL + / – /
FWD
(MUTE) / OPTIONS /
BACK / the NUMBER buttons can
be used to control your connected
EasyLink devices by this unit's remote
control.
Disable HDMI-ARC.
You can output TV audio through the
HDMI cable solely, provided both the
TV and device are HDMI-ARC
compliant.
Return your settings to default values
You can return settings to their default values.
1
Use
2
Use
OK.
Reset AV settings
Reset all settings

Accessibility

1
Press
2
Use
3
Use
Picture
Sound
Features
Installation
Accessibility
4
Adjust the following items.
Voice guide
Lets you configure voice guide and its settings.
1
Use
Voice guide toggle
/
/ OK /
Speed
Pitch
Verbosity
Volume level
to select Restore default settings, then press OK.
to select Reset AV settings or Reset all settings, then press
Return picture and sound settings to their default
values. The channel installation settings are not
affected.
Return all the settings to their default values.
and use to select Setup then press OK.
to select TV settings, then press OK.
to select Accessibility, then press OK.
Voice guide
Caption settings
Digital audio preferences
to select Voice guide, then press OK.
To set Voice guide off
Off
To set Voice guide on
On
Fast
Set voice guide speed based on
Normal
your preference
Slow
High
Set voice guide pitch based on
Normal
your preference
Low
Set voice guide explanation
Verbose
verbosity based on your
Succinct
preference
Loud
Set voice guide volume based on
Normal
your preference
Soft
.
33
English
Continued on next page.