Fans - IBM 7063-CR2 Manual

For instructions, see "Replacing a fan in the 7063-CR2 system" on page 20.
8. Using your labels, replace the two drives into the system.
a) Support the drive by the bottom as you position the drive, and insert it into the drive slot.
Important: Ensure that the drive is fully seated and is all the way into the system.
b) Lock the drive bay handle (A) by pushing in the handle release latch until it locks into place.
Figure 14. Installing a drive
9. Replace the system in the rack and replace the components that you removed.
For instructions, see "Placing a 7063-CR2 system into the operating position" on page 103.
10. Power on the system for operation.
For instructions, see "Starting the 7063-CR2 system " on page 98.
Removing and replacing fans in the 7063-CR2
Learn how to remove and replace fans in the IBM Power Systems HMC (7063-CR2) system.
Removing and replacing parts in the 7063-CR2 17