modway EEI-3919-WHI Quick Start Manual page 6

Properly insert the Camlock (C) in the pre-drilled hole then align it to the assembled Cambolt (B) to secure
both Side Panel Left (1) to the Vertical Panel 2 (11) and Vertical Panel 3 (12).
This assembly namely Side Frame Assembly
8.1- Lay flat the Side Panel Left (1) which already assembled with 4 pieces of Cambolt (B).
8.2- Insert Camlock (C) to the pre-drilled hole of the Bottom Panel (3) then properly align the Wooden
Dowel to the pre-drilled hole of the Side Panel Left (1).
8.3- Once aligned and attached, make sure to secure Camlock (C) from the Bottom Panel (3) to the
Cambolt (B) of the Side Panel Left (1).
8.4- Repeat steps to secure the Base Panel 1 (4), Base Panel 2 (5) and Back Panel 7 to
the Side Panel Left (1) as shown.
Hardware required. Screwdriver not included
Hardware required. Screwdriver not included