modway EEI-3939 Quick Start Manual

EEI-3939/ EEI-3940/ EEI-3941
Thank you for purchasing the MODWAY TWIN BASIN.
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2. Tools and Materials required: a. Flat, nonabrasive work surface such as a blanket or smooth cardboard;
b. Sealant.
3. Owing to the size and weight of the basin, we recommend that it is assembled by a professional two men
crew, a single person crew is much more likely to break or chip the marble top. Double tops might require a 3
men crew, on a carpeted or padded area, in the room that it is intended for. Approximate assembly time: 30
minutes.
4. Professional installation by two-person crew is required for this fixture. Install water supply and drain piping
according to local plumbing and building codes. Insure that wall and floor are square and plumb at site of
installation.
5. Please do not throw away any of the packaging or the instruction until you have checked all the components
and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
and environmentally friendly way.
6. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten
the components from time to time, so please save the tools that have been provided.
7. Please keep all the pieces out of reach of children.
Components:
1. Metal Frame Side
4. Upper Middle Bar
Customer Service 609-256-9000︱www.modway.com
x2 2. Upper Side Bar
x1 5. Top with Basin
Hardware:
A. Bolt M8x12mm
Allen Wrench
B.
C. Rubber Sucker
x2 3. Bottom Side Bar
x1 6. Glass
x20
x1
x6
x2
x1
Page 1 of 4