Setting Gl2 Emulation Options - Epson ColorPage 8000 Printer Manual

3-14 | Configuring the Printer

Setting GL2 Emulation Options

The GL2 emulation allows you to use your printer with plotter applications.
Within this emulation, you can choose between two modes, LJ4GL2 and
GLlike.
GL2 menu settings
Setting Options
GL-Mode LJ4GL2, GLlike
Scale Off, A0, A1, A2, A3
Origin Corner, Center
Pen Pen0, Pen1, Pen2, Pen3 Pen4,
Pen5, Pen6
End Butt, Square, Triangular, Round
Join Mitered, Miteredbeveled,
Triangular, Round, Beveled, None
Pen0 0.05 to 5.00 mm in steps of 0.05
mm; default is 0.35 mm
Pen1
Pen2
Pen3
Pen4
Pen5
Pen6
3-14
Description
Selects the HP LaserJet4
emulation of GL/2 or
EPSON GL/2.
Selects whether the output
is scaled, and whether the
scale factor is based on the
output paper size of the
application.
Sets whether the origin of
the plotter-unit coordinate
system is at the lower-left
or the center of the page.
Selects the logical "pen."
Sets the line-ending style.
Sets the way lines are
joined.
Sets the line width for each
"pen."