Opticon PX-35 Quick Start Manual

PX-35
• Read this quick start guide carefully before installing and/or using this product.
• Keep this quick start guide for future reference and store it in a safe place.
• This quick start guide may be revised or withdrawn at any time without prior notice.
• This quick start guide may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any
electronic or machine readable form without prior written consent of Opticon.
• Trademarks used are property of their respective owners.
• Under no circumstances shall Opticon be held responsible for any special, incidental, consequential or indirect damages
howsoever caused.
1. LED Safety
• Do not stare into the LED light from the optical window. It may cause damage to your eyes.
2. Use of the Product
Radio frequency energy from wireless devices may affect some sensitive electronic medical equipment. In order to avoid
interference with the operation of this equipment, wireless devices should be switched off when requested in hospitals,
clinics, or health care facilities.
3. Handling Instructions
PX-35
【 】
• Do not attempt to disassemble, modify or update this device.
• Operating the device while operating machinery or a vehicle can be distracting.
• Do not drop this product or put heavy items on this product.
• Avoid static electricity
• Do not use this device near combustible materials.
• Do not store this device in an extremely cold or hot environment.
• Scanning performance may decline due to excessive ambient light.
• Do not swing the device around by the strap.
• Do not insert a sharp object into this device.
• Keep the device out of the reach of small children.
• When cleaning this product, rub gently with either a soft dry cloth or a damp cloth with mild detergent.
• Do not use this product in the following areas:
-In areas exposed to direct sunlight for long periods of time.
-Near water or other liquids, or in extremely high humidity.
-In dusty environments.
-Near heat sources, such as radiators, heat registers, stoves, or other types of devices that produce heat.
-Near microwaves, medical devices, or RF-emitting devices.
-In areas where dew condenses.
-In any other areas where serious damage is considered to occur.
Battery Pack 】
【
• Do not attempt to disassemble this battery.
• Do not expose the battery pack to liquids or allow the battery contacts to get wet.
• Do not expose the battery pack to heat sources including other devices that produce heat.
• Do not short the power leads on the battery pack. If the (+) and (-) terminals come in contact with metals (such as necklace
or hairpin), a short circuit will occur.
• Do not load the battery pack with its (+) and (-) terminals reversed.
• Check the local regulations for proper battery disposal.
4. Radio Equipment
• Do not peel off the certification label.
5. Bluetooth
• Bluetooth® is a registered trademark owned by Bluetooth SIG, Inc., U.S.A. and is used by OPTICON under license.
• This product supports Bluetooth wireless communication with other Bluetooth devices that have the same profile.
• This product complies with Bluetooth version 2.0; however, its communication performance with equipment other than
cradles or devices stated in this manual is not guaranteed.
• Bluetooth devices use the 2.4 GHz frequency band. Scientific, medical, and industrial devices, including radio stations,
microwave ovens, wireless security (camera) systems and WLAN use the same frequency band as this product. Interference
from other devices may affect the communication speed or communication range of this scanner or vice versa.
Introduction
Notice
Caution and Warning
©
Copyright 2008, Opticon All rights reserved.
Quick Start Guide
(Please refer to the specification manual and instruction guide for details.)