Selecting Typestyles - Epson LQ-2550 User Manual

First, make sure that the TEAR OFF light is on, and then press the MICRO
FEED button. The display shows TEf!R OFF f3DJUST. Next, adjust the
tear-off position in 1080th of an inch increments by pressing the FORM
FEED button (A) to feed the paper forward or the LINE FEED button (V)
to feed it backward. After setting the position, press the MICRO FEED
button again.
Caution: The short tear-off feature can only be used with the built-in
tractor feeding system.
Once you use the micro-adjustment feature to set the tear-off position,
the printer remembers that position even after it is turned off.

Selecting Typestyles

Your printer can produce a wide range of typestyles by using different
fonts, pitches, widths, and other print variations. You can select
typestyles in three different ways: by using software commands, by using
section describes how to select a typestyle using the FONT, PITCH, and
CONDENSED buttons on the control panel.
Using the Printer
3-33