Connecting Chimneys - Sirius Satellite Radio SUTC92 Installation Instructions Manual

fig. 8
Connect the appropriate length of ducting
to the fan exhaust point and join up with the
ducting to the exterior.
Figure 9 shows venting directly through the
wall. Venting up and through the ceiling to the
exte-rior is also possible (refer to Fig 10).
fig. 9
fig. 10
Do not fix the ducting to the range hood
exhaust outlet with screws-use duct tape.
Use duct tape on all joints.

Connecting Chimneys

Remove the protective covering from the
decorative chimney and carefully slide the
sections together. Do not remove the tape
strips from inside the chimney as this pro-
tects the telescoping chimney-piece from
scratching. Holding the two chimney sec-
tions together carefully position them over
the ductwork and wiring. Position the upper
chimney so that it can be fixed via the holes
on the side of the 'Y" bracket on the ceiling
(refer to Figure 11).
9