Chimney Installation; Hanging The Range Hood; Connecting Electricity And Ducting - Sirius Satellite Radio SUTC92 Installation Instructions Manual

Chimney Installation.

Locate the bracket (Fig. 2Y) and
it with the vertical axis (marked on the wall
earlier) running through the midpoint of bra-
cket "Y". This bracket fits onto the ceiling
and onto the wall to secure the upper half
of the decorative chimney in place. Mark the
wall for the two anchors and mark the ceiling
for the two anchors as indicated in Fig. 2.
Fix bracket "Y - Fig.2" to the wall and ceiling.

Hanging the Range Hood.

Prepare the range hood for installation. Re-
move all filters to ensure they do not get da-
maged during the installation process. Hang
the range hood on the bracket "S" (refer to
Figure 6).
fig. 6
The bracket fixed onto the back of the range
position hood will drop into the channel on the top of
bracket "S" on the wall. Ensure the hood is
securely engaged into the support bracket
-the range hood must clip in behind the ex-
tended lip on the Support Bracket ("S").
"Lock" the range hood onto the "S" bracket
using the four machine screws supplied (re-
fer to Figure 7).
fig. 7
These screws are also used to make minor
adjustments to the levelling of the range
hood. Ensure the hood is level. Locate the
two holes "C" inside the housing of the range
hood and secure the range hood to the wall
once the range hood is perfectly level and
vertical. (refer to Figure 3).

Connecting Electricity and Ducting.

Please refer to the Electrical Supply section
on page 2 for the required location of the
electrical supply.
CAUTION: Make sure the power is turned off
at source. Make electrical connections (refer
to Figure 8).
Ensure that the plastic flaps at the exhaust
outlet for the fan move freely and have not
become jammed or stuck.
8