Epson WorkForce 520 Quick Manual page 11

Setting Up With the Product Buttons
If you are using Mac OS X 10.6, or you did not connect a USB cable to set up the
product on your wireless network, follow these steps to set it up using the product
buttons:
1. Follow the instructions on the screen to start the product's wireless Setup
Wizard.
2. When you see this screen, use the product's buttons to select the name of your
wireless network, then press
If your network name isn't listed, try the following:
■
Make sure that your wireless router or access point is turned on and
working correctly. Press the
the previous screen, press
■
If you still can't find the network name in the list, your router or access
point is not broadcasting its network name. Press u or d to select
, then press
SSIDs
Manually" on page 14.
. When you're finished, click
OK
y Stop/Clear Settings
to select
OK
. Continue with the steps in "Entering Your SSID
OK
button to return to
, then repeat step 2.
Setup Wizard
Wireless Network Setup
.
Next
Other
11