Receiving Faxes - Epson WorkForce 520 Quick Manual

■
One-touch dial button: Press a button on the right side of the control panel to
select one of the first five speed dial/group dial entries and press
enter another entry or press
■
If you've connected a telephone to the product, dial
the number from the phone. Press
Note:
Don't hang up the phone until you begin transmitting the fax.

Receiving Faxes

Before receiving faxes, make sure you load plain paper and select the
setting that matches the size of paper you've loaded. If the incoming fax pages are
larger than the paper size you loaded, the fax size is reduced to fit or printed on
multiple pages, depending on the
online User's Guide for instructions.
To receive faxes automatically, make sure the
Auto Answer
Auto Answer
Note:
To change the number of rings before the product answers,
see page 38.
If you run out of paper during printing, you see the error
message
Paper out
button to continue.
To receive faxes manually, turn off the
1. When your telephone rings, lift the phone off the hook.
2. Press to receive the fax, then press
2
3. After all the pages are received, you see the Fax ready screen. Replace the
phone on the hook.
4. Press
OK
40
Receiving Faxes
light is turned on. To turn it on, press the
button, then press
. Load more paper and press the
to print the fax.
to continue.
2
to confirm.
1
Auto Reduction
.
OK
Auto Answer
at the next screen.
1
OK
Paper Size
setting you select. See your
Auto Answer
light
OK
light and follow these steps:
. Press to
1
Auto Answer
Speed Dial/
Group Dial
BS
Redial/Pause