Any Problems; Any Questions - Epson Stylus Photo RX700 Start Here Manual

Any Problems?

If you are having a problem with your RX700, check the message on the
control panel. Try turning the RX700 off and then back on to clear the error.
If your problem is listed here, try these suggestions. For more information,
see your Basics book, software Help, or on-screen Reference Guide.
The Found New Hardware
Wizard appears on
your screen.
You see an error message
when you try to print
or scan.
The RX700 doesn't work.
The Stylus Photo RX700
makes noise after you
turn it on.

Any Questions?

Here's where to look for answers:
Epson Stylus Photo RX700 Basics
Includes instructions on copying, printing, and scanning
without a computer.
On-screen Reference Guide
Explains how to use your RX700 with a
computer. Double-click the Reference Guide
icon on your desktop to view the guide.
On-screen help for ArcSoft PhotoImpression™ , EPSON Scan, and
EPSON Print CD
Click the Help button or question mark that appears on the screen
when you're using any of these programs.
Epson Technical Support (Stylus Photo RX700, EPSON Scan, and
EPSON Print CD)
• World Wide Web
http://support.epson.com
• Automated Telephone Services
To use these services, you must have a touch tone telephone and call
(800) 922-8911. Your Epson SoundAdvice
Use this code to quickly select your product in SoundAdvice.
• To speak to a Technical Support Representative
Dial (562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 6
Pacific Time, Monday through Friday. Toll or long distance charges
may apply.
Software Technical Support
Software
ArcSoft
PhotoImpression
Click Cancel and disconnect the RX700.
Install the software as described on this
sheet.
Make sure your RX700 is connected to your
computer, plugged into a power source, and
turned on.
Make sure you have unlocked the scanner,
as described in section 2. Turn the RX700
off and then on again.
Make sure the ink cartridges are pushed all
the way in and the covers are closed.
Make sure your RX700 software is installed
correctly.
Make sure the scanner lock is in the unlocked
position, as shown on the front of this sheet.
After releasing it, turn off the RX700, wait a
moment, then turn it back on.
It is normal for the RX700 to make whirring
sounds after you turn it on.
Telephone and Fax
(510) 440-9901
8:30 to 5:30
AM PM
Pacific Time,
Monday–Friday
Fax: (510) 440-1270
Express Code is 70635.
SM
Internet and E-mail
www.arcsoft.com/en/support
, support@arcsoft.com
to 6 ,
AM PM