Epson Stylus Photo RX700 Start Here Manual page 5

3
When you see this screen, click Install.
Note: If you don't see this screen, do the following:
Windows XP: Click Start >
Epson CD-ROM icon.
Windows 98/Me/2000: Double-click
click the Epson CD-ROM icon.
4
Read the license agreement, then click Agree. Several messages
display on your screen.
5
When you see this screen, plug the flat end of the USB cable into any
available USB port on your computer.
6
Click Next to continue the installation.
Note: It will take several minutes to install the software. Click Next or
Finish, as prompted. Don't cancel the installation.
7
When the installation is complete, print a test page, if desired. Then
click Next to install optional software.
8
Follow the instructions on the screen to install the software. When done,
click Exit.
9
When you see the Product Registration screen, register your RX700 as
instructed, then remove the CD-ROM and restart your computer.
Now you're ready to copy, scan, and print. See the Basics book or your
on-screen Reference Guide for instructions.
Macintosh
1
Insert your RX700 software CD-ROM into your CD-ROM or DVD drive.
2
Double-click the
click the
My Computer. Then double-click the
Epson CD-ROM icon, if necessary. Then double-
Epson installer icon. You see this screen:
My Computer. Then double-
continue