What To Do If; General Declaration Of Conformity - Becker Centronic SunWindControl SWC241-II Assembly And Operating Instructions Manual

Problem
Drive is not functioning.
System does not extend manually.

General Declaration of Conformity

Becker-Antriebe GmbH hereby declares that the Centronic SunWindControl
device SWC241-II complies with the fundamental requirements and other rel-
evant rules of Directive R&TTE 1999/5/EC.
Intended for use in the following countries: EU, CH, NO, IS, LI
Subject to technical changes without notice.

What to do if...?

Insert a new battery.
Insert the battery correctly.
Reduce the distance to the receiver.
Transmitter is not programmed in the
receiver.
Program transmitter.
Wind threshold value exceeded. Wait
for the wind to die down.
Remedy
21 - en