Remote Operation - Panasonic KX-TGH262C Operating Instructions Manual

3
MbN: Select the desired setting. a
MSAVEN a MOFFN
Listening to messages
After you answer the new message alert, you
can listen to the messages as follows.
n When the remote access code is set to
"Inactivate":
Press 4 to play the new message during
the announcement.
n When the remote access code is set to
"Activate":
1
Enter the remote access code
(page 53) during the announcement.
2
Press 4 to play the new message.
Note:
R Within 10 seconds after listening to new
messages, you can press #9 during the
call to turn off the new message alert by a
call feature.
R Even if the unit makes a new message alert
call, the handset redial list does not show
the record.

Remote operation

Using a touch-tone phone, you can call your
phone number from outside and access the
unit to listen to messages or change
answering system settings. The unit's voice
guidance prompts you to press certain dial
keys to perform different operations.
Remote access code
A 3-digit remote access code must be entered
when operating the answering system
remotely. This code prevents unauthorized
parties from listening to your messages
remotely. The default setting is "111".
Important:
R To prevent unauthorized access to this
product, we recommend that you regularly
change the remote code.
1
MMENUN (right soft key) #306
TGH26xC(en)_1224_ver013.pdf
2
3
Deactivating remote operation
Press * in step 2 on "Remote access code",
page 53.
R The entered remote access code is deleted.
Using the answering system
remotely
1
2
3
4
Voice guidance
During remote operation, the unit's voice
guidance starts and prompts you to press 1
to perform a specific operation, or press 2 to
listen to more available operations.
Note:
R If you do not press any dial keys within 10
Remote commands
You can press dial keys to access certain
answering system functions without waiting for
the voice guidance to prompt you.
Key
1
2
4
5
53
Answering System for Landline
Enter the desired 3-digit remote access
code.
MSAVEN a MOFFN
Dial your landline phone number from a
touch-tone phone.
After the greeting message starts, enter
your remote access code.
Follow the voice guidance prompts as
necessary or control the unit using
remote commands (page 53).
When finished, hang up.
seconds after a voice guidance prompt, the
unit disconnects your call.
Operation
Repeat message (during
*1
playback)
Skip message (during
playback)
Play new messages
Play all messages
2013/12/24 14:29:41
53