Listening To Messages - Panasonic KX-TGH262C Operating Instructions Manual

Answering System for Landline
Resetting to a pre-recorded greeting
message
If you want to use a pre-recorded greeting
message once you record your own greeting
message, you need to erase your own
greeting message.
1
MMENUN (right soft key) #304
2
MYESN a MOFFN
Playing back the greeting
message
1
MMENUN (right soft key) #303
2
To exit, press MOFFN.

Listening to messages

Using the base unit
When new messages have been recorded,
M N on the base unit flashes.
Press M N (PLAY).
R During playback, M
lights.
R If new messages have been recorded, the
base unit plays back new messages.
R If there are no new messages, the base
unit plays back all messages.
Operating the answering system
during playback
Key Operation
MjN or MkN Adjust the speaker
volume
M N
Repeat message
M N Skip message
M N (STOP) Stop playback
MERASEN Erase currently playing
message
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
50
TGH26xC(en)_1224_ver013.pdf
Erasing all messages
Press MERASEN 2 times while the unit is not in
use.
Using the handset
When new messages have been recorded,
"New message" is displayed.
1
2
Note:
R To switch to the receiver, press M
R You can also use the MPLAYN soft key, if
Using the Smart function key
When "New message" is displayed and the
messages.
Press M
page 50.
N on the base unit
R "New message" must be set to "On" in
Listening to messages from the
message list
You can select the item to play back.
1
2
*1
3
Note:
R If the item has already been heard, "
R "Message" is displayed in the message list
50
To listen to new messages:
MMENUN (right soft key) #323
To listen to all messages:
MMENUN (right soft key) #324
When finished, press MOFFN.
displayed, to play new messages.
indicator flashes slowly, there are new
N in step 1 on "Using the handset",
"Setting the Smart function key", page 14.
MMENUN (right soft key) #329
MbN: Select the desired item from the
message list. a MPLAYN
R You can erase the selected message
as follows:
MMENUN a MbN: "Erase" a
MSELECTN a MbN: "Yes" a
MSELECTN
When finished, press MOFFN.
displayed.
if the unit cannot receive caller information.
2013/12/24 14:29:41
N.
" is