Table of Contents
Advertisement
R The unit announces the name or phone
number depending on your cellular phone.
R This feature may not pronounce all names
correctly.
R Text message alerts are not logged in the
caller list of your unit.
Using a Bluetooth wireless
headset (optional) for
landline calls
By pairing a Bluetooth headset to the base
unit, you can have a hands-free conversation
wirelessly for landline calls.
Important:
R Your Bluetooth wireless headset must
support the HeadSet Profile (HSP)
specification.
R 1 headset can be paired to the base unit.
R Only 2 Bluetooth devices can be used with
the unit at the same time (for example, 2
cellular lines, or the headset and 1 cellular
line).
R For best performance, we recommend
using a Bluetooth headset within 1 m
(3.3 feet) of the base unit. A headset can
communicate with the base unit within a
range of approximately 10 m (33 feet).
Pairing a headset to the base unit
Important:
R Make sure that the Bluetooth headset is not
connected to any other Bluetooth device.
1
Your headset:
Set your headset to pairing mode.
R Refer to the headset operating
instructions.
2
Handset:
MMENUN (right soft key) #621
3
If your headset PIN is "0000", go to
step 4.
If your headset PIN is other than
"0000", press MCLEARN, then enter your
headset PIN.
R Typically, default PIN is "0000". Refer
to the headset operating instructions.
TGH26xC(en)_1224_ver013.pdf
4
5
Connecting/disconnecting a headset
If you cannot connect the headset and base
unit using the headset, you can connect using
the handset.
To use your headset with another Bluetooth
device such as a cellular phone, you may
need to disconnect it from the base unit.
Important:
R Make sure that the headset is turned on.
1
2
Unpairing a headset
You can cancel a pairing of the headset that is
stored to the base unit.
1
2
3
Operating a Bluetooth wireless
headset using a landline
Important:
R Refer to your headset operating instructions
Answering landline calls with your
headset
To answer a landline call, turn on your
headset referring to your headset operating
instructions.
When you finish talking, turn off your headset
referring to your headset operating
instructions.
47
Using Bluetooth Devices
Press MOKN, then wait until a long beep
sounds.
MOFFN
R When the HEADSET indicator on the
base unit lights up, you are ready to
use the headset.
To connect/disconnect:
MMENUN (right soft key) #622
R A long beep sounds.
MOFFN
MMENUN (right soft key) #612
MbN: "Yes" a MSELECTN
R When the headset is unpaired, the
HEADSET indicator is turned off.
MOFFN
for headset operations.
2013/12/24
14:29:40
47
Advertisement
Table of Contents
