Supermicro AS -1014S-WTRT User Manual page 45

6. Reposition the fan housing back over the two mounting posts in the system, then
reconnect the fan wires to the same fan headers on the motherboard.
7. Power up the system and check that the fan is working properly and that the LED on the
control panel has turned off. Finish by replacing the chassis cover.
Note: the figure above is intended to show fan location only. The motherboard may differ
from that in the AS -1014S-WTRT.
Chapter 3: Maintenance and Component Installation
Figure 3-20. Replacing a System Fan
45