Scanning Problems - Epson Artisan 710 Series Network Installation Manual

■
Try connecting the printer to another router, access point, switch, or hub.
■
Try connecting the printer to your router, access point, switch, or hub
with another Ethernet cable.
■
When using TCP/IP, make sure the printer's IP address is set correctly for your
network. If your network does not assign IP addresses using DHCP, you need
to set the IP address manually.
Printing is slow or the print is cut off
For wireless connections, print a Network Status Sheet (see below) and check the
Signal Strength. Or check the number of bars next to the
printer's control panel. If the Signal Strength is poor or you see only one or two
bars, try moving the printer closer to your wireless router or access point. Avoid
placing the printer next to a microwave oven, 2.4 GHz cordless phone, or large
metal objects such as a filing cabinet.
A dial-up connection dialog box appears when printing with EpsonNet
Print
If you use a dial-up connection for Internet access, you will see this message every
time you print. Try connecting to the Internet using a LAN connection or set your
dial-up connection to dial manually (Never dial a connection).

Scanning Problems

Cannot find the scanner or start Epson Scan
■
If network communication was interrupted while starting Epson Scan, exit
Epson Scan, and restart it after a few seconds. If Epson Scan cannot restart,
turn the printer off and back on, and then try restarting Epson Scan. Check
the
Timeout Setting
Scan Help.
■
If you have a firewall or Internet security software installed, the search feature
in
EPSON Scan Settings
Network Status Sheet (see below), click
Enter address
■
If you are scanning a large document at high resolution, a communication
error may occur. If the scan did not complete, lower the resolution.
34
Troubleshooting
in
EPSON Scan Settings
may not work correctly. In this case, print a
, and enter the IP address manually.
WiFi icon on the
. For details, see the Epson
EPSON Scan Settings
> >
Add