4. When you see this screen, click
5. Follow the steps on the right side of the screen to add your EPSON TCP/IP
It may take up to 90 seconds for your computer to find the EPSON TCP/IP printer
on the network.
6. Follow the prompts on the screen to print a test page, install bonus software,
and finish the installation.
7. When installation is complete, restart your computer.
You're ready to scan and print. See your printed documentation and on-screen
Epson Information Center for details.
If you have problems setting up or using your product on a network, check these
sections for help:
"Setup Problems" below
"Printing Problems" on page 33
"Scanning Problems" on page 34
This section also explains how to print a Network Status Sheet (see page 35).