Epson Artisan 710 Series Network Installation Manual page 32

EpsonNet Setup was unable to find my printer on the network
1. If you see a screen like this one, do one of the following:
■
If you connected the printer wirelessly, verify that the printer is turned on
and the
setup using the printer's control panel
■
If you connected the printer to your network with an Ethernet network
cable, verify that the printer is turned on and connected to your network.
Select
■
If you created an Ad-Hoc wireless connection, do one of the following:
■
■
■
If you're switching from a wireless to a wired network connection, you
need to disable the wireless adapter using the printer's control panel.
Select
Wireless LAN Setup
Select
2. Continue clicking
printer. Then continue with step 9 on page 26.
32
Troubleshooting
WiFi icon appears on the printer's control panel. Select
Wired Network (Ethernet) setup
For Windows users:
with an Ethernet cable, disconnect it. When setup is complete,
reconnect your computer's Ethernet cable.
For Macintosh users:
with an Ethernet cable, you cannot set up your printer this way. See
page 5 or page 23 to set up your printer.
on the printer's control panel, select
Setup
F
, then press
Yes
until EpsonNet Setup begins to search for your
Next
If your computer is connected to a network
If your computer is connected to a network
>
Advanced Setup
.
OK
, then click
Next
, then click .
Next
Network Settings
>
Disable Wireless LAN
Wi-Fi
.
>
.