Table of Contents
Advertisement
8) SLEEP (ECONOMY MODE) BUTTON
Select this function just before going to sleep. It maintains a comfortable temperature through the night and save
energy. This function is available on COOL, HEAT* or AUTO modes only.
9)SWING BUTTON
Used to start and stop the function of the rotating directional and set the desired air flow direction.
10) DIGITAL DISPLAY
2-Digit LED display for the unit and LCD with additional indicators for the remote controller.
11) PMTS (FOLLOW ME) BUTTON
PMTS means Personal Mapping Temperature Sensor. This feature uses the remote controller to monitor tem-
perature in another location of the room and sends information to the unit every 3 minutes.
12) LED DISPLAY BUTTON***
Turns the temperature display on the unit on and off.
13) SHORTCUT BUTTON
This button is one-touch preset for your favorite settings.
14) ION***
Toggles the ION air cleaning feature.
*Note: On the unit itself, the single "TIMER" button serves the function of both the "TIMER ON" and "TIMER OFF"
buttons. If your unit is off at the time you press the TIMER button, the first function you'll be programming will be
the TIMER ON function. If your unit is operation at the time you press the TIMER button, the first function available
will be the TIMER OFF function. Pressing it a second time will program the opposite function. All of this is clearly
indicated by the corresponding TIMER ON or TIMER OFF LED found above the button.
**Since your unit does not have the heat feature, you should bypass it on the remote controller.
***NOT AVAILABLE ON ALL UNITS
13
Advertisement
Table of Contents
