Impecca IPAC10-LR User Manual page 12

CONTROL PANEL AND REMOTE CONTROLLER OVERVIEW
The following diagram and legend shows the functions of both the unit's control pan-
el and the remote controller. Some functions are only available on select models.
9 8
1) ON/OFF BUTTON
Machine will start and stop when this button is pressed.
2) TEMPERATURE UP BUTTON
Push this button to increase the indoor temperature setting in 2°F increments up to 88°F.
3) TEMPERATURE DOWN BUTTON
Push this button to decrease the indoor temperature setting in 2°F increments down to 62°F.
4) MODE BUTTON
Each time the button is pressed, the operating mode of the air conditioning unit is selected in the following se-
quence: AUTO > COOL > DRY > HEAT** > FAN
5) FAN SPEED BUTTON
Adjust the machine fan speed from: AUTO > LOW > MED > HIGH
6) TIMER ON BUTTON — REMOTE/ TIMER BUTTON — UNIT*
Press this button to activate Auto-On. This feature turns on the unit at a programmed time within the next 24
hours.
Each press of the Timer-On button will increase the time setting in 30 minutes increments, up to 10 hours, then
in 1 hour increments from 10 to 24 hours. To cancel the Auto-On time setting, just press the button until the time
setting is 0.
7) TIMER OFF BUTTON — REMOTE / TIMER BUTTON — UNIT*
Press this button to activate Auto-Off. This feature turns off the unit at a programmed time within the next 24
hours.
Each press of the Timer-Off button will increase the time setting in 30 minutes increments, up to 10 hours, then
in 1 hour increments from 10 to 24 hours. To cancel the Auto-Off time setting, just press the button until the time
setting is 0.
7 6 5 4
10
3 2 1
12
K
B
ON/OFF SHORT
CUT
E
TIMER
MODE
ON
TEMP
F
TIMER
FAN
OFF
O
ION
I
SLEEP SWING PMTS LED
J
C
N
G
H
D
M
L