Table of Contents
Advertisement
The DEVICE STATUS menu screen provides two selections, the
CHASSIS STATUS VIEW screen and the COMPONENT STATUS
VIEW screen.
The CHASSIS STATUS VIEW screen lets you:
•
View the configuration, ring speed, and type of each token ring
module currently inserted in the MMAC.
•
Monitor and manage the operational status of all ports.
•
Convert Station ports to Ring Out ports.
•
Individually enable or disable ring or station ports on a module, or
collectively enable all ports on a module.
•
Set the modules in your MMAC chassis to either management or
automatic operational mode.
•
Enable, disable, or bypass Flexible Network Bus (FNB) Multiplexer
(MUX) connections.
The COMPONENT STATUS VIEW screen provides a read-only screen
that shows all the TRMM/TRMMIM's current components.
To access the DEVICE STATUS screen from the MAIN MENU screen,
highlight the DEVICE STATUS option and press Enter. The DEVICE
STATUS menu screen shown in Figure 5-1 appears.
To exit the DEVICE STATUS menu screen, highlight the RETURN
command at the bottom of the screen and press Enter.
CHAPTER 5
THE DEVICE STATUS MENU
5-1
Advertisement
Table of Contents
