Ring Security Screen Definitions - Cabletron Systems TRMM User Manual

THE DEVICE SETUP MENU
be removed from the ring, a "Remove Station Failure" trap/alarm is sent to
the NMS.
A third default mode, Disabled, allows stations to enter the ring with no
security action taken.
To access the RING SECURITY screen from the DEVICE SETUP screen,
highlight the RING SECURITY option, then press Enter. The RING
SECURITY Screen shown in Figure 4-5 appears.
To exit the RING SECURITY screen, highlight the RETURN menu
command and press Enter.

4.4.1 Ring Security Screen Definitions

The following section provides a brief explanation of each field and
command on the RING SECURITY screen.
TRMM LOCAL MANAGEMENT Flash Image Version: 03.00.05
RING SECURITY
STATION ADDRESS
00-00-B8-50-63-61
Stn Edit 00-00-00-00-00-00 [ Add ] Security Mode [ Disabled ]
SAVE/EXECUTE RETURN
Figure 4-5. The RING SECURITY Screen
Station Address
This field lists the MAC address of each station on the ring security
allowed list. The list holds up to 250 MAC addresses.
4-15