Chapter 2 Accessing Local Management; Management Terminal Configuration - Cabletron Systems TRMM User Manual

Local management
Hide thumbs Also See for TRMM:
Table of Contents

Advertisement

ACCESSING LOCAL MANAGEMENT
This chapter describes how to access Local Management (LM). The
TRMM/TRMMIM's COM 2 port supports direct connection to a
management terminal and to a modem for establishing out-of-band LM
sessions. The TRMM/TRMMIM also supports single in-band Telnet
sessions with LM. Using the TRMM/TRMMIM IP address, Telnet to the
module to establish the connection.
NOTE: Modem setup and attachment procedures for accessing LM are
fully described in the "TRMM/TRMMIM Token Ring Management
Modules Installation Guide."

2.1 MANAGEMENT TERMINAL CONFIGURATION

You can access Local Management by attaching a management terminal
(or a modem) at the COM 2/Console port on the front of the management
module (see Figure 2-1). The port supports Digital Equipment Corporation
VT200 or VT300 series terminals or a PC software emulation of those
terminals.
Console Port
Figure 2-1. Local Management Terminal Attachment
CHAPTER 2
C
O
N
S
O
L
E
TOKEN RING
MMAC-8FNB
Local
Management
Console
2-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Trmmim

Table of Contents