Table of Contents
Advertisement
The DEVICE SETUP menu allows you to assign the following:
•
System Level parameters for the TRMM/TRMMIM (including its
System Date and Time, SNMP Agent IP address and Subnet Mask,
Beacon recovery parameters, and a Locally Administered FNB MAC
Address).
•
The SNMP Community Names used to access the TRMM/TRMMIM
through local or remote management.
•
The IP addresses of network management workstations to which the
TRMM/TRMMIM will issue traps.
•
The entries into the ring security database that establishes which
stations can access the TRMM/TRMMIM-controlled ring.
•
The IP address of the router over which firmware can be downloaded
to the TRMM/TRMMIM from a file server.
To access the DEVICE SETUP menu from the MAIN MENU, highlight
the DEVICE SETUP option and press Enter. The DEVICE SETUP
menu (Figure 4-1) will appear.
To exit the DEVICE SETUP menu, use the arrow keys to highlight
RETURN at the bottom of the screen and press Enter.
NOTE: Please note that the FLASH DOWNLOAD screen is not supported
at this time.
CHAPTER 4
THE DEVICE SETUP MENU
4-1
Advertisement
Table of Contents
