Viessmann Vitovalor 300-P Installation And Service Instructions For Contractors page 61

Pairing wireless accessories (where present)
Logging on the wireless outside temperature sensor
A
B
Fig. 57
Pairing the Vitotrol 200-RF
1. Insert batteries (LR 6/AA, part of the standard
delivery) into the remote control.
The configuration assistant then starts automati-
cally.
"CI" appears on the remote control display and
"Lrn" flashes.
2. On the remote control, press OK.
The remote control sends a pairing signal to the
control unit.
Pairing successful:
■
"C2" appears on the remote control display and
"000" (first digit flashes).
■ Pairing unsuccessful:
"_ _ _ _ " and .appears on the remote control
display.
Repeat the pairing process.
Pairing the Vitotrol 300-RF
1. Supply power to the Vitotrol 300-RF (via batteries
or table-top dock).
The commissioning assistant starts automatically.
2.
Select language
Dansk DK
Deutsch DE
English GB
Fig. 58
Select language.
Note
When the unit is first commissioned, "Select lan-
guage [Sprache wählen]" is displayed in Ger-
man.
OK
Commissioning, inspection, maintenance
(cont.)
1. Open the enclosure of the outside temperature
sensor.
2. Briefly press on the outside temperature sen-
A
sor.
While the connection is being established, LED
on the outside temperature sensor briefly flashes
red.
Once the connection is established, "New subs.:
OK" is displayed on the control unit.
If the connection cannot be established, "No sub-
scriber" is displayed.
3. Once pairing succeeds, enter the 3-digit wireless
key on the remote control. The wireless key is dis-
played on the control unit.
With +/- enter the first digit, then confirm with
■
OK.
■ Select the next position using
next digit using +/-.
■ Confirm each entry with OK.
4. Once the wireless key has been fully entered, "C3"
and "H 1" appears on the remote control. On the
control unit, "New subs.: OK" is displayed.
After this, assign the required heating circuit to the
remote control.
3. "Activate wireless connection" appears.
4. Press "OK" on the remote control.
B
and enter the
61