Operating manual SW GII 64006..., 6407..., 6408...
1
Description
JAUDT distributor valves are designed for the distribution and bypassing of powdery to fine-
grained substances which are transported in rectangular and round pipelines. They are manufactured using
the very latest production methods in top quality. They are sturdy, provide an excellent seal and require very
little maintenance.
1.1
Validity of this operating manual
This operating manual applies to the symmetrical and asymmetrical JAUDT distributor valves with nominal
sizes of 150x150 to 700x700 mm.
1.2
Identification point
Each JAUDT distributor valve has an identification plate:
The machine number does not specify the coating or accessory equipment.
When placing orders for spare parts or making inquiries, please always quote both numbers (order and
model number).
1.3
Other relevant documents
The confirmation of order is a part of this operating manual. It contains the following information:
Model, identical to the model indicated on the identification plate.
Problem definition; the version of distributor valve is designed precisely for this problem definition.
Technical specifications of the distributor valve and technical specifications of the drive (where
applicable).
Every operating manual is also accompanied by the following documents:
Dimension sheet and spare parts list.
Operating manual with table of lubricants for motors (if supplied with a motor).
Shaft encoder data sheet (proximity switches) if supplied with a shaft encoder.
ATEX insert if used as a device falling under EU Directive 94/9/EC or used in areas at risk of
explosion.
These accompanying documents are part of this operating manual!
©SW_GII_EN_Rev02-2010.DOC
Page 2 of 15