Table of Contents
Advertisement
Operating manual DKV 6008...
3.3.1
Hand-lever (Page 5 Position 6)
Manual operation with indicator (7) for the position of the sealing plate.
Also in stock: retaining pin, sealing-off fitments, locking facilities (not illustrated).
3.3.2
Pneumatic Operation
Filtered compressed air, water-free, oiled, pressure 7
Pneumatic cylinder (11)
Pneumatic rotating actuator PDA (14) with 5/2-way solenoid valve
3.3.3
Electric servo drive (9) (illustrated with motor type 0A 8)
Standard equipment:
Three-phase positioning drive, 230 V/400 V 50 Hz, ISO F, IP65
Two integrated limit switches for the positions „OPEN - CLOSED‟
The user must ensure that the electrical connections run via motor protection switches.
Connection to power is the sole responsibility of the user and his own qualified personnel.
The instructions from the motor manufacturer regarding start-up, maintenance and installed position must
be observed. This information can be supplied by JAUDT if necessary.
Technical Data – Rotating actuator (PDA)
3.4
With distribution with a rotating actuator PDA - the technical documentation is supplied of this operating
manual.
Standard version Rotating actuator PDA:
Make
Type
DKV Ø
Technical Data – Electric servo drive
3.5
With distribution with a electric servo drive - the technical documentation is supplied of this operating man-
ual.
Standard version Electric servo drive :
Make
OA-6 – 6 sec
Type
DKV Ø
100, 150
© BA_DKV_EN_Rev07-2010.DOC
ACG
AC-A83DA
AC-A92DA
100, 150
200, 250
DEUFRA
OA-8 – 6 sec
200, 250
11 bar abs.
AC-A105-DA
300, 350
AS-18 – 5 sec
300, 350
Page 7 von 20
Advertisement
Table of Contents
