Programmable Button Function - RELM RP7200 Owner's Manual

Make a Call
To make a call, select the desired channel,
press and hold the PTT button, and speak in
normal voice. Please keep your mouth 3~8 cm
away from the microphone.
Receive a Call
Release the PTT button to receive a call. Select the desired
channel, adjust the volume to a proper level, and then you can
receive others' voice.

PROGRAMMABLE BUTTON FUNCTION

The dealer can program the side button 1, side button 2 and the top
button with the following auxiliary functions:
Null (No Function)
Channel Annunciation
Whisper
Talk-around
CALL 1/2/3/4
Lone Work
Emergency Alarm
Cancel Emergency Alarm
Man-down Alarm
Scan
Temporarily Delete Noise Channel
Call Forward
7
High/Low Power Switch
Squelch Level adjust / Check
Monitor Momentary/Call Cancel
Monitor/ Call Cancel
Squelch off Momentary/Call Cancel
Squelch off/ Call Cancel
Key Lock
Compander
Scrambler
Battery Power Check
Rental Time Check
GPS GPS Position Annunciation
GPS ID GPS ID Annunciation
GPS GPS Time Annunciation
The dealer can program the following functions:
Null
No Function is programmed.
Chan Annunciation
Pressing this key to switch on and off the channel annunciation
function.
Whisper
After pressing this key, receiver also can hear you even you
speak lightly; Press key again will disable the whisper mode.
Talk Around
After pressing this key, the radio will transmit with the RX
frequency.
8