Radio Overview; Basic Operations - RELM RP7200 Owner's Manual

RADIO OVERVIEW

7
5
4
6
① LED Indicator
Lights red when transmitting; lights green when receiving.
Flashes orange when receiving the identical 5-Tone Signalling.
Flashes red when battery power appears low.
② Channel Selector
Rotate to select channel 1~16.
③ Power/Volume Knob
Turn clockwise to switch on the radio.
Turn counterclockwise till a click is heard to switch off the radio.
Rotate to adjust the volume after turning on the radio.
④ PTT (PUSH-TO-TALK) Button
To make a call, press and hold the PTT button, then speak into the
microphone in normal voice. Release the PTT button to receive
signals.
5
2 3
1
8
⑤ Side Button 1 (Programmable Button)
⑥ Side Button 2 (Programmable Button)
⑦ Top Button (Programmable Button)
⑧ Speaker/Microphone Jacks
Used to connect the optional speaker/microphone.

BASIC OPERATIONS

Switch On
Switch on the radio by turning the
Power/Volume switch clockwise till a click is
heard, then the radio will be in the state of
stand by and you will hear a beep if the dealer
has set it. And then you will hear voice
annunciation of the current channel number.
Adjust Volume
Press the monitor button to listen to the
background noise and rotate the Power/Volume
switch to adjust volume.
Select Channels
Rotate the channel selector to select channels.
You will hear voice from the speaker while
receiving proper signals.
If voice annunciation of channel number has
been set, the radio will annunciate the current
channel number.
6