Table of Contents
Advertisement
* When you charge the battery for the first time after purchasing or long
storage (over 2 months), you should repeat charging it several times to
achieve the normal battery capacity.
* Do not recharge the battery if it has been fully charged or the battery
power doesn't become low, otherwise it might affect the battery life or
performance. Remove the battery from the charger after charging.
* When using BPRP1700, if the radio enters low power warning state,
please recharge the battery. Do not use the radio in low power state, which
will affect the battery life and performance.
INSTALLING /REMOVING THE BATTERY PACK
Installing the Battery Pack
Match the 2 bulges of the battery pack with the
corresponding slots at the rear bottom of the radio.
Installing the Battery Pack
Then firmly press the battery pack downwards to lock
it in place until a click is heard.
Removing the Battery Pack
To remove the battery pack, push the latch upwards
and then pull the battery away from the radio.
Notice:
Do not short-circuit the battery terminals or dispose exhausted battery
*
In fire.
Do not disassemble the battery casing.
*
3
INSTALLING THE ANTENNA
Screw the antenna into the connector at
the top of the radio by holding the
bottom of the antenna and turn it
clockwise until secure.
INSTALLING THE OPTIONAL
SPEAKER /MICROPHONE
Insert the Speaker/Microphone plug into
the jacks of the versatile connector.
INSTALLING /REMOVING
THE BELT CLIP
Match the grooves of the belt clip with
those on the rear of the battery.
Then press the belt clip downwards to
lock it in place.
To remove the belt clip, use your nail or
a tool to lift the metal spring piece in the
belt clip from the topside, and then pull
the belt clip away from the radio.
4
Advertisement
Table of Contents
