Westfalia TSMM125 Operating Instructions Manual page 58

The Parallel Guide
To cut parallel to a wood edge, you can use the enclosed parallel guide (22).
1. In order to fix the parallel guide (22), loosen the clamping knob (10) slightly.
With the centimetre scale on the parallel stop, you can adjust the distance
between the stop bar and the saw blade.
2. Secure the parallel guide by tightening the clamping knob (10).
When not using the parallel guide, tighten the clamping knob (10) securely.
The clamping knob can be unscrewed and fall off due to the vibration of
sawing.
Determining the Cutting Line
When using the saw with guide rail always align cutting line (9) at the front and
back of the base plate with your marked cutting line for straight cuts.
Saw Blades
 Use only saw blades with diameters in accordance with the requirements
on the saw.
 Use only recommended saw blades.
MM (Multi Material)
TCT (not included in delivery)
Operation
External Diameter: Ø 125 mm
Bore Diameter: Ø 10 mm
Thickness: 1.8 mm
Number of Teeth/Segment: 24
Max. permissible Rotation Speed: 10000 min
Application: Saw Work
Material: Wood, Steel, non-ferrous Metals, Laminate, Plastic
etc.
External Diameter: Ø 125 mm
Bore Diameter: Ø 10 mm
Thickness: 1.8 mm
Number of Teeth/Segment: 24
Max. permissible Rotation Speed: 10000 min
Application: Saw Work
Material: Wood
50
-1
-1