Function And Control; Introduction Of Control Pane - Gree R1 Service Manual

6.Function and Control

6.1 Introduction of Control Pane

Note:
If wireless remote controller is lost, you can use the remote control panel and
operate manually.
2
3
7
2
3
7
4 TIME/TEMP BUTTON
Press the
Press the
The temperature setting range is from 16~30°C.Press the
increase the selected time in 0.5 hour increments, and Press the
to decrease the selected time in 0.5 hour decrements, The time setting range
is from 0~10 hours. Press the
1 hour increments, and Press the
1 hour decrements, The time setting range is from 10~24 hours.
5 SIGNAL RECEIVER
6
MODE BUTTON
Select the operation mode, AUTO, COOL, DRY, FAN, HEAT (for reverse cycle
model) or AUTO, COOL, DRY, FAN (for cooling only model).
7 FILTER BUTTON
This feature is a reminder to clean the Air Filter (See Care and Cleaning) for
button and the light will go off. Before the LED(light) illuminate, press the
will be canceled.
28
keypad to increase the set (operating) temperature of the unit. and
keypad to decrease the set (operating) temperature of the unit.
keypad also to increase the selected time in
5
1 ON/OFF BUTTON
1
Operation starts when pres-
6
sing this button, and stops
when pressing this button
4
again.
4
2 SWING BUTTON
Activate the automatic air
5
swing function.
1
3 FAN SPEED BUTTON
6
Select the fan speed LOW,
MID, HIGH and AUTO in
4
sequence.
4
keypad to decrease the selected time in
keypad also to
k e y p a d o t
Technical Information
Service Manual