Table of Contents
Advertisement
Operation
4.
Models equipped with trim rods: Once
the outboard motor is supported with the
tilt support lever, press the power trim
and tilt switch "
trim rods. NOTICE: Be sure to retract
the trim rods completely during
mooring. This protects the rods from
marine growth and corrosion which
could damage the power trim and tilt
mechanism.
[ECM00251]
EMU33121
Procedure for tilting down (power
trim and tilt models)
1.
Push the power trim and tilt switch "
(up) until the outboard motor is support-
ed by the tilt rod and the tilt support lever
becomes free.
2.
Release the tilt support lever.
64
ZMU03996
" (down) to retract the
ZMU03997
3.
Push the power trim and tilt switch "
(down) to lower the outboard motor to
the desired position.
DN
DN
"
ZMU03998
UP
DN
ZMU01936
ZMU04603
"
Advertisement
Table of Contents
