Emergency Starting Engine - Yamaha Z200 Operator's Manual

Hide thumbs Also See for Z200:
Table of Contents

Advertisement

dangerous. Keep loose clothing and
other objects away when starting the
engine. Use the emergency starter rope
only as instructed. Do not touch the fly-
wheel or other moving parts when the
engine is running. Do not install the
starter mechanism or top cowling after
the engine is running.
Do not touch the ignition coil, spark
G
plug wire, spark plug cap, or other elec-
trical components when starting or op-
erating the motor. You could get an
electrical shock.
EMU29583

Emergency starting engine

1.
Remove the top cowling.
2.
Remove the flywheel cover.
3.
Prepare the engine for starting. For fur-
ther information, see page 55. Be sure
the engine is in neutral and that the clip
is attached to the engine shut-off switch.
4.
Turn on the main switch.
5.
Insert the knotted end of the emergency
starter rope into the notch in the flywheel
rotor and wind the rope around the fly-
wheel several turns clockwise.
6.
Give a strong pull straight out to crank
ZMU04443
the
WARNING! Do not install the top
cowling when engine is running.
[EWM00621]
ZMU02334
Trouble Recovery
OFF
OFF
ON START
engine.
Repeat
ON
ON
START
OFF
START
ZMU04589
ZMU01906
if
necessary.
ZMU04444
91

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lz200

Table of Contents