Brother PT-E800W User Manual page 42

Printing a Label Using the P-touch Labeling System Keyboard
Format

You can select which information to use when adding the date and time to your label.
a
Select [Settings] in the Home screen using the , ,
key.
b
Select [Time Stamp Setting] using the
c
Select [Format] using the
then press the OK or Enter key to apply the settings.
Attribute
Format
Forward

You can select whether to use a future date and time, a past date and time, or the current date and time
when [Timing] is set to [Auto].
a
Select [Settings] in the Home screen using the , ,
key.
b
Select [Time Stamp Setting] using the
c
Select [Forward] using the
Enter key.
d
Select [Add] or [Reduce] using the
using the or
using the or
Note
You can also set the date and time by typing in the numbers you want.
Attribute
Forward
or key, select the value for the setting using the
Setting Description
Prints only the date on the label.
Date
Prints only the time on the label.
Time
Prints the date and time on the label.
D&T
Prints the time and date on the label.
T&D
or key, select [On] using the
or
key, and then set the amount to increase or decrease from the currently set clock
key. After all parameters are set, press the OK or Enter key to apply the settings.
Setting Description
Prints the current time and date.
Off
Increases or decreases the date and time according to the value
On
selected in the [Forward] setting.
or key, and then press the OK or Enter
or key, and then press the OK or Enter key.
or key, and then press the OK or Enter
or key, and then press the OK or Enter key.
or
key, select the year, month, week, date, hour or minute
or key, and
key, and then press the OK or
2
31