Table of Contents
Advertisement
Printing Using the Computer
WPS (Wi-Fi Protected Setup™)
If your wireless access point/router supports WPS, you can configure settings and connections wirelessly.
a
First, confirm that your wireless access point/router has the WPS symbol.
b
Select [Settings] in the Home screen using the , ,
key.
c
Select [WLAN] using the
d
Select [Infrastructure Mode] using the
e
Select [Network Setting] using the
f
Place your P-touch labeling system within the range of your wireless access point/router. The range
may differ depending on your environment. See the instructions provided with your wireless access
point/router.
g
Select [Button Push] using the
h
Press the OK or Enter key for a message that appears before the [Start WPS on Your Wireless
Access Point].
The [Start WPS on Your Wireless Access Point] message appears.
i
Press the WPS button on your wireless access point/router, and then press the OK or Enter key on
your P-touch labeling system.
Note
To return to the previous step, press the Esc key.
j
[Connecting...] appears for a while, and then [Connected!] appears.
k
Press the OK or Enter key.
The screen returns to the [Settings] menu screen.
Depending on the strength of the wireless signal, the wireless connection indicator may show one of
the following symbols:
Note
• If you start the setup wizard for the Infrastructure mode or select the network settings for the Direct mode
when the wireless function of the P-touch labeling system is turned off, [Turning on Wi-Fi Radio]
appears and the wireless function turns itself on automatically (or after the OK key is pressed). It is no
longer necessary to turn the Infrastructure mode or Direct mode on manually.
or
key, and then press the OK or Enter key.
or
or
key, and then press the OK or Enter key.
or
key, and then press the OK or Enter key.
or
key, and then press the OK or Enter
key, and then press the OK or Enter key.
4
67
Advertisement
Table of Contents
