Black Box ServSwitch ServView 17 Series Manual page 56

ServView 17 Enterprise KVM Drawer
Primary DNS Server IP Address
IP address of the primary Domain Name Server in dot notation. This option may be left
empty, however the IP-KVM switch will not be able to perform name resolution.
Secondary DNS Server IP Address
IP address of the secondary Domain Name Server in dot notation. It will be used if the Pri-
mary DNS Server cannot be contacted.
Remote Console and HTTPS port
Port number at which the IP-KVM switch's Remote Console server and HTTPS server are lis-
tening. If left empty the default value will be used.
HTTP port
Port number at which the IP-KVM switch's HTTP server is listening. If left empty the default
value will be used.
Telnet port
Port number at which the IP-KVM switch's Telnet server is listening. If left empty the default
value will be used.
Bandwidth limitation
The maximum network traffic generated through the IP-KVM switch Ethernet interface.
Value in Kbps.
Enable Telnet access
Set this option to allow access to the IP-KVM using the Telnet Gateway.
Disable Setup Protocol
Enable this option to exclude the IP-KVM switch from the setup protocol.
53