Kvm Installation - Black Box ServSwitch ServView 17 Series Manual

3.1 KVM Installation

Power ON
■ Turn off all servers and KVM switches.
■ Make sure all cables / connectors are properly connected.
■ The recommended Power ON sequence is monitor, KVM switch, and then finally the
computer.
Front Panel Port LED Indications
16 Ports
Bank No.
32 Ports
Bank no.
PC Port LEDs
Channel Button
Bank Button
ServView 17 Enterprise KVM Drawer
PC Port LEDs
Power: Orange LED on indicating a PC is connecting to the port
Access: Red LED on indicating a selected channel
Enter to select channel from 01 to 32
7-Segment BANK LED indication
Select the bank from 1 to 8
14
Bank
Channel
Button
Button