Black Box ServSwitch ServView 17 Series Manual page 42

ServView 17 Enterprise KVM Drawer
Share configuration dialogue
Adjust the settings for the selected directory
■ Activate the selected directory as a share. Select "Sharing this folder".
■ Choose an appropriate name for the share. You may also add a short description
for the folder (using the "Comment" field).
■ If necessary, adjust the permissions (using the "permissions" button).
■ Click "OK" to set the options for this share.
UNIX and UNIX-like OS (Sun Solaris, and Linux)
If you need to access the share via SAMBA, it must be correctly configured. You may either
edit the SAMBA configuration file /etc/samba/smb.conf, or use the Samba Web Administra-
tion Tool (SWAT) or WebMin to set the correct parameters.
Creating an image
Floppy Images
UNIX and UNIX like OS
To create an image file, make use of "dd". This is one of the original UNIX utilities and is
included in every UNIX-like OS (UNIX, Sun Solaris, and Linux).
To create a floppy image file, copy the contents of a floppy to a file. You can use the
following command:
dd [ if=/dev/fd0 ] [ of=/tmp/floppy.image ]
dd reads the entire disc from the device /dev/fd0 , and saves the output to the specified out-
put file /tmp/floppy.image. Adjust both parameters to your own values (input device etc.)
MS Windows
You can use the tool "Raw Write for Windows". It is included on the CD ROM shipped with
IP-KVM switch.
39